Adjustable floor-
levelers are provided
under your unit.
Make sure to adjust
unit so that it may
firmly be positioned
for support while
staying parallel to
ground. Avoid any
forward tilt which may cause
TV to lean off balance. Do not
to over-extend levelers beyond
their supporting housing. They
need to firmly remain within
the grip of their threaded bushings.
Maximum extension = 1/4".
6
ATTACH TOP PANEL
CLEANING
Glass Surfaces and Matte Lacquer Surfaces (EL-479):
Apply window cleaner with soft. tissue. This will
also eliminate slight surface abrasions or scratches that may have occurred in shipping or handling.
Wood Veneer Surfaces (EL-469) should only be cleaned with non-coloring or non-staining fine quality wood fur-
niture polish.
Distributed by: Elite Industries 77 Gould Street • Bayonne, NJ 07002
Elite Industries ensures complete satisfaction with this product. In the event of missing or damaged parts call toll free,
Customer service hours: 8:45-4:45, Monday-Friday, EST.
1-800 ELITE-48 •
Tel.: 201-436-1120 • Fax: 201-436-6960
Congratulations and enjoy your new ELITE product!
7
ADD GLASS SHELVES
Adjust plastic
screws on
undersides of
all shelf pins.
Position Back Metal
Posts of Top Panel
(A) over Post Pins
and align holes on
underside of Top
Panel (A) with metal
tabs of Top Front
Metal Molding (E).
Using Hex Key (O)
tighten hex lock
mechanisms on Back
Metal Posts to
secure position.
Using 2 screws (K),
secure Metal Front
Molding to underside
of Top Panel (A).
Insert Shelf Pins (N) at desired heights on both Side Panels B and C.
NOTE: Before adding glass shelves, check plastic screw adjustment on ALL shelf pins to be
sure glass will slide smoothly into slots from front to back.
Slide glass shelves into shelf pins.
Make sure to secure all shelves in place, using all plastic
adjustment screws on undersides of shelf pins, turning them clockwise to lock.
A
A
A
A
D
N
N
H
B
C
B
K
C
H
O
A
B,C
F
UNDERSIDE
A
K