2
TOP PANEL PREPARATION
WHEN INSERTING
CONNECTING BOLTS
DO NOT OVERTIGHTEN
A
B
C
C
E
1
1
UNDERSIDE
2
UNDERSIDE
FRONT EDGE
Turn Top Panel (2) over to expose the underside.
Attach 2 Magnetic Touch Latches (D) to the FRONT EDGE
using 4 Screws (E).
Magnets must face front.
Attach 6 Connecting Bolts (C) into the
pre-installed small plastic threaded holes
as indicated.
DO NOT OVER TIGHTEN.
3
SIDE PANELS PREPARATION
4
CENTER VERTICAL
SUPPORT
PREPARATION
SPECIAL NOTE
Camlocks must be inserted with the arrow
facing the nearest unfinished edge.
Insert 4 Wooden Dowels (K) into top and bottom
edges of RIGHT Side Panel (3).
Insert 4 Camlocks (F) into top and bottom edges
of RIGHT Side Panel (3)
PLUS
2 Camlocks (F)
into
Front Edge
as shown.
Insert 4 Wooden Dowels
(K) into top and bottom
edges of Center Vertical
Support Panel (4).
Insert 4 Camlocks (F) into
top and bottom edges of
Center Vertical Support
Panel (4).
Insert 4 Wooden
Dowels (K) into top
and bottom edges
of LEFT Side
Panel (3).
Insert 4 Camlocks
(F) into top and
bottom edges of
LEFT Side Panel (3)
PLUS
2 Camlocks
(F) into
Front Edge
as shown.
FRONT
EDGE
BACK
EDGE
BACK EDGE
FRONT
EDGE
3
3
4
F
K
K
K
K
K
K
K
K
K
K
K
K
F
F
F
F
F
F
F
1
BOTTOM PANEL
PREPARATION
WHEN INSERTING
CONNECTING BOLTS
DO NOT OVERTIGHTEN
D
D
5
VERTICAL MOULDINGS PREPARATION
Insert 2 Wooden Dowels (K)
into top and bottom edges of each
Vertical Moulding (5).
Insert 2 Connecting Bolts (C) into each
Vertical Moulding as shown.
5
5
K
K
K
K
C
WHEN INSERTING
CONNECTING BOLTS
DO NOT OVERTIGHTEN
477445
Page 2/4
08.30.10
Turn Bottom Panel (1) over to attach 5 Casters (A) to the
underside using 3/8" Screws (B).
Turn Bottom Panel (1) over. Attach 6 Connecting Bolts
(C) into the pre-installed small plastic threaded holes as
indicated. DO NOT OVER TIGHTEN.
FINISHED FRONT EDGE