CABINET PARTS
1.
Bottom Panel
2.
Top Panel
3.
Left and Right Side Panels
(identical)
4.
Center Vertical Support
5.
Left and Right Vertical
Mouldings (identical)
6.
Two Adjustable Shelves
7.
Back Panel (2 identical parts)
8.
Two Glass Doors
ALIGN
CAMLOCK &
CONNECTING
BOLT
JOIN PIECES
TOGETHER
ARROW WILL NOW
BE AWAY FROM
THE EDGE ON THE
OPPOSITE SIDE.
TURN CAMLOCKS
180° CLOCKWISE
USING A FLATHEAD
SCREWDRIVER
1
2
3
PLEASE DO NOT RETURN UNIT TO STORE FOR PARTS & CUSTOMER SERVICE.
PLEASE CALL 1-800-ELITE-48. CUSTOMER SERVICE HOURS EASTERN TIME 8:45 AM - 4:30 PM M-F
VISIT OUR WEBSITE AT: www.elite-inds.com
Thank you for purchasing this Elite product. You will need the following tools:
Phillips Head Screw Driver • Straight Blade Screw Driver • Rubber Padded Hammer or Mallet
ASSEMBLY INSTRUCTIONS
TV STAND:
Model EL-147N
Black Matte Melamine
OVERALL DIMENSIONS:
18-1/2" H x 47" W x 17-1/2" D (Top), 19" D (Bottom)
477445
Page 1/4
08.30.10
D
2
Magnetic
Touch Latch
E
4
BLACK
1/2" Wood Screws for
Magnetic Touch Latch
F
16
Camlocks
G
16
BLACK
5/8" Screws for
Back Panel
H
8
1" Long Shelf Pin
J
16
Plastic Camlock
Covers
K
16
Wooden Dowels
N
2
2
8
Glass Door Hinges
P
4
Protective Plates
Q
2
Metal Strike Plates
R
2
Foam
Protective Pads
S
4
Plastic Bushings
Hardware for Unit Assembly
IMPORTANT NOTES & CAUTIONS/WARNINGS
•
Carefully read and follow these instructions for assembly.
•
Please handle parts carefully, some parts may be heavy and can have sharp edges –
we recommend possibly using cloth protective gloves for extra protection.
•
To protect the unit and your flooring surface we recommend working on a padded
or carpeted area, you may also use the open box the unit came in for this purpose.
•
For proper construction & integrity/assembly and for TV weight support and safety,
all connections need to be sufficiently tight. However, do not over-tighten
connections to the point of stripping screw threadings. Parts are designed to fit
together tightly, however, avoid excessive force but rather align & fit panels together
methodically and with patience.
•
For some heavy or large units, it may be recommended for 2 people to work
together on this assembly.
•
It is extremely important to attach the
BACK PANEL
as instructed within this manual.
Such panels are crucial for the stability and structural support of the unit.
•
Please read additional
important safety information
at the end of this
instruction manual.
•
We urge you to keep this manual with your unit for future reference.
SPECIAL NOTE:
In all steps
involving camlocks, please note the
correct position of the camlock in
the illustration at the left. Check all
camlocks before aligning and join-
ing pieces together.
IMPORTANT:
Throughout assembly of the unit,
camlocks must be inserted with
the ARROW FACING THE EDGE.
CAMLOCK/
CONNECTING
BOLT
PROCEDURE
8
8
2
7
7
3
4
3
6
6
1
5
A
5
Casters
B
20
CHROME
3/8" Wood Scews
for Casters
C
16
Connecting Bolts
18-1/2"
17-1/2"
19"
47"
14-1/8"
21-3/8"
15-1/8"
5