477771
Page 4/8
11.11.10
6
ATTACH SIDE PANELS
AND VERTICAL
DIVIDER PANELS TO
BOTTOM PANEL
7
TOP PANEL
PREPARATION
On
underside of Top
Wooden Panel (5), insert
8 Connecting Bolts (A)
into holes indicated.
Attach Single Magnetic
Touch Latch (H) using 2
Screws (I) to the right
and left near the front as
indicated.
Align Dowels of Side Panels (3)
and Vertical Divider Panels with
appropriate holes on underside
of Top Wooden Panel (5).
Butt pieces together.
Turn Camlocks 180 degrees
to lock.
8
ATTACH TOP WOODEN PANEL
TO SIDE PANELS AND
DIVIDER PANELS
9
ATTACH RAILS FOR LOWER DRAWERS
Attach Y-Rails to left inside Vertical Divider Panel (4)
using 2 Screws (Y1) for each Y-Rail.
Attach Y-Rails to right inside Vertical Divider Panel (4)
using 2 Screws (Y1) for each Y-Rail.
Make sure that the wheels on the Y-Rails are at
the front edge of the Vertical Divider.
1
5
5
3
4
4
3
1
3
4
4
4
3
A
A
A
H
Y-RAIL
Y-RAIL
UNDERSIDE
BACK EDGE
BACK EDGE
BACK EDGE
H
I
I
WHEN INSERTING
CONNECTING BOLTS
DO NOT OVERTIGHTEN
Align Dowels of each Side Panel (3)
with appropriate holes on Bottom
Panel (1). Butt pieces together. Turn
Camlocks 180 degrees to lock.
Make sure that Vertical Dividers
are positioned so that Camlocks
are facing to the inside.
Align
Dowels of each Vertical Divider Panel
(4) with appropriate holes on Bottom
Panel (1). Butt pieces together. Turn
Camlocks 180 degrees to lock.
