1.
Assem
P
P
t
S
P
2.
Insert
G
Bas
H
mble Knob on Lid:
Position the knob a
Push the screw an
the lid.
Screw tightly into th
Periodically tighten
t Grilling pan:
Glass Lid
se
4
OW TO ASSE
and knob ring over
d washers through
he knob.
screw if necessary
Lid Knob
Grease Collector
EMBLE
r the hole on the
the hole on the b
.
Grill
Therm
r
lid.
bottom side of
mostat Control
5
Place grilling pan onto the base assuring the power receptacle fits into
the corresponding opening on the base.
Push down on the grilling pan, locking it securely to the base. You
should hear a snap as it locks.
3.
Connecting the Temperature Selector:
CAUTION: ALWAYS ATTACH THE THERMOSTAT CONTROL TO THE
GRILL FIRST AND THEN PLUG IT INTO THE ELECTRICAL OUTLET.
MAKE SURE THE THERMOSTAT CONTROL SWITCH IS IN THE
“
OFF
”
POSITION BEFORE ATTACHING IT TO THE GRILL.
Insert the thermostat plug on the thermostat control into the
corresponding socket on the grill; at the same time ensure that the
pins in the thermostat socket are inserted into their corresponding
sockets on the thermostat control switch.
Ensure that the Thermostat Control is not loose or falling off of the
grill.
HOW TO USE
CAUTION
: NEVER TOUCH THE GRILLING SURFACE WHEN THE APPLIANCE
IS IN OPERATION AS IT IS VERY HOT AND DOING SO WILL LEAD TO
PERSONAL INJURY. To protect the premium quality non-stick surface, use only
plastic, nylon or wooden utensils.
1.
Assemble the grill.
2.
Place the grill and grill base on top of a stable, flat, heat resistant
surface.
3.
Spray or brush the grilling surface with your cooking oil of choice.
4.
Plug the power cord on the Thermostat Control into the electrical outlet.
Turn the knob to the desired heat setting:
“
1
”
being the lowest heat setting
and
“
5
”
being the highest. The red indicator light will illuminate. The light
will go off when the grill has reached the selected temperature indicating
that the grill is ready to use.
NOTE:
As the temperature of the grill is being maintained, the
indicator light on the thermostat control will turn on and off.
5.
Place your food onto the grill to cook.
6.
When you are finished cooking, turn the knob to
“
0
”
to shut off. Unplug
the power cord from the electrical outlet.
7.
After the grill has cooled down, disassemble the grill, wash and thoroughly
dry all parts before storing or using again.
CLEANING AND MAINTENANCE
