12
G.
When there is heartbeat input; the heartbeat value of 85%, 65% and maximum heartbeat value
will switch display. If there is no heartbeat input. All values won’t display.
H. Press any PROGRAM
to perform this action.
5.
INTERVAL Press the UP/DOWN to select this function. In standby mode, the user can also press
INTERVAL key to enter into directly. 5.1. INTERVAL20/10
A. Press the INTERVAL Key to select INTERVAL20/10. Press ENTER to enter into this mode,
INTERVAL20/10 will flash and the buzzer will ring once.
B. After CYCLE TIME counts down from 3s, then the console STARTS. The buzzer will ring in every 1
second when count down. When READY, it will flash in every 1 second, (flash 0.75s, quench 0.25s),
the value display 00/08(picture 5).
C. CYCLE TIME begin to count down from 20s and the WORK will blink in every 1s flash 0.75s/
quench 0.25s), the buzzer will ring at the same time. At this time, the wheel rim will have revolving
animation, and the computer will count down from 4 minutes. TOTAL TIME, DISTANCE, CALORIES,
WATTS, SPEED and RPM begin to accumulate according to the operation value, and the value
displays 01/08.
D. CYCLE TIME begin to count down from 10s, and the REST will flash in every 1s( flash 0.75s,
quench 0.25s), the buzzer beeps at the same time. At the last 3s, the READY will flash at the same
time.
E. C and D will perform tautologically and circularly, each cycle count plus 1 until display “WORK
08/08”. After exercise, CYCLE TIME begin to count down from 10s, and the REST will flash in every
1s,( flash 0.75s, quench 0.25s).
F. If there is no signal input for 30s, the buzzer will ring 1s. Then enter into sleeping mode.
G. Press START button one time to enter into STOP mode, the buzzer will ring 0.5s in every 30s.
After enter into STOP mode, all value will be remained on the screen for 3s, and flash in every
4s(flash 3s, quench1s). If stop more than 5 minutes, the buzzer will sound 2s, then enter into
standby mode. Press START to exercise again.
H. Press STOP button to finish, the buzzer will ring 1s. TIME display the total time, DISTANCE display
the total distance, and CALORIES display the total Cal for 30s. WATT, SPEED, RPM will switch display
the average value and the maximum value.
I. When there is heartbeat input, the heartbeat value of 85%, 65% and maximum heartbeat value
85% 65%will switch display. If there is no heartbeat input. All value won’t display.
J. Press any PROGRAM to perform this action.
