3
displayed and updated during measurement. Press once, minimum
value shall be displayed and updated. press again, maximum value shall
be displayed and updated. Press & hold the button again (the third
push ),clamp meter return to normal measurement mode.
5. Peak hold Button
This button is used to enable the Peak value to be displayed and updated
during measurement. Press again clamp meter return to normal
measurement mode.
6 .Data Hold &Backlit Button
once this button is pushed,reading shall be held on the LCD. Press
again to release it. Press & hold the button 2 Sec. release backlight is on,
again press & hold the button 2 Sec. release backlight is off.
7, Mode Button
A, Use ACA leakage current detection by measuring current 50/60Hz and
40~1000kHz response of choice
。
B, Press the button to Select ACV or DCV measuring function.
8. LCD
This is a 3 3/4 digit liquid crystal display with maximum indication off
6000. Function symbols, units, bargraph, sign, decimal points, low
battery symbols, Peak & Max/Min symbols symbol are included.
9. .V
Ω
input Terminal
This terminal is used as input for voltage or ohm/continuity
measurements.
10. COM Terminal
This terminal is used as common reference input.