When you open the parking monitoring in the off state, if the car has
a slight vibration, the recorder will automatically start recording. Turn
off at this time if it is in the state will be recorded in 20 seconds and
then shut down (time can be set for automatic shutdown
).
•
[Note] This feature requires hardware support
5)
Boot video:
•
Boot video could be described as the car supply the power
starting, it will starting-up automatically and enter the video state,
Manual operation is not required. There are “open” ”closed”
features for your selection
6)
Language selection:
•
There are six languages for you to choose from, which contains
“Chinese simplified’ ”Chinese traditional” ”English” ”Russian”
“Japanese” “Koran”
，
you can select the corresponding Language
according to your request.
7)
Frequency:
•
The frequency option is mainly for the different countries of the
light source frequently. There is a difference in some ways, such
as the Chinese source light frequency is 50Hz. However, the
South Korea source light frequency is 60Hz. Frequency
difference will impact on video, there are “50Hz” “60Hz” optional.
8)
Record audio:
•
Turning on/off Record audio will turn sound recording on/off
•
Press the [OK] key, the recorder automatically starts. Video
recording indicator lights up and blinks. To turn off audio
recording while the video is recording, press [Down] for 3
seconds, the recorder will automatically save the record again
and shut down audio recording.
9)
Screen saver settings
: Functions of screen saver settings is
achieved in the absence of any key operation. Screen saver mode can
be set under Menu> Backlight, you can choose the screen to turn off after
1 minute or 3 minutes. Choose “Off” under backlight, if you do not want
the screen to turn off.
10.) G-sensor function
The unit features an impact sensor (G-sensor). If a serious vehicle
collision, the recorder will lock the first 10 seconds, and 20 seconds
after the accident occurred and save it as a special image, the
monitor will display a lock icon in the lower left. Locked images will
not be overwritten.
【
prompt
】
a. Lock the video file name at the beginning of ZW, general log files
beginning with AW.
b. G sensor can be turned on under Menu [G-sensor], you can
select the desired G sensor sensitivity High, Medium, Low or Off,
according to the actual need. The higher the sensitivity, the more
videos will be locked and will not be erased during loop recording,
therefore, we suggest you to select Medium sensitivity.
Alternatively, Press Mode while the video is recording to lock the
files.
