www.elinz.com.au
1300 881 773
Initial logger settings
Set the date and time:
1
、
You need to press the OK button to pause the recording to enter into other modes.
2
、
And then press the button twice, by pressing , or to select the date / time, then press the OK button to enter the setting
3
、
Or by pressing the buttons to adjust the value, press the OK button to enter another field. Until the completion date and time
settings, press @ exit.
Recorder Recording Operations
1, When the car engine is started, the device is automatically turned on and start recording. When the engine stalled,
then it will automatically stop recording. Or press the OK button to manually stop recording.
2. Other types of camera: Press the OK button, then start recording; press the OK button again, then stop recording.
3. Emergency camera
Note: Some vehicles powered car charger interface is often when the engine stalled, the power supply will continue to work.
If you encounter such a situation, take the following steps: Open the manual way off / off the device, or unplug the car
charger from a car cigarette lighter port.
Note:
⑴
Video will be recorded in 1, 3, 5 minutes video cycle, please select your preference in Menu settings>Loop
recording.
⑵
The videos will be saved in the camera memory card, if the memory card is full, the oldest file is automatically overwritten
on memory card.
⑶
Emergency or for gravity sensing camera , video cannot be automatically overwritten, you need to manually delete .
Note: If you start a gravity sensor, and detects a collision, the device will automatically lock the current record video and will
not be overwritten.
