www.elinz.com.au / [email protected] / 1300 881 773
Each time the camera settings cycle is not the same - Check if motion detection
function is on, because the camera motion detection state length of time,
depending on the screen if there is no movement.
Video recorded is unclear - Please clean the lens before shooting the surface,
keep the lens clean.
Bad video effect - Camera and lightning conditions will affect the video quality;
adjust the position of the dash cam for best result.
Images have streaks interference - This is due to the wrong setting “light
frequency" produced under the fluorescent lights, the domestic flat rate "50HZ"
when the machine briefly press the "RESET" the reset button to restore restart.
If you have further questions or clarifications feel free to contact us at 1300
881 773, send us an email at [email protected] or chat with us.
