www.elinz.com.au / [email protected] / 1300 881 773
Reversing camera installation
1.
Connect the reversing camera to the car number plate and adjust the
angle of the lens.
2.
Connect the red wire to the positive of the reversing light (the reversing
image will show on the screen automatically when the car is on
reverse).
3.
Connect the black wire to the negative of the reversing light.
4.
Connect the video cable to the “Reversing camera input” of the dash
cam (this will feed the video image from the camera to the dash cam,
and also provide power to the camera when the car is on forward gear).
5.
In the reverse image state, use the [Up] / [Down] keys to adjust the
position of the reference line. After that, the adjustment will be
saved.
