Installation Guide Documentation Number:
ESW726series-1211ig
1
B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax 815-433-5104 – www.bb-elec.com
B&B Electronics – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph +353 91-792444 – Fax +353 91-792445 – www.bb-europe.com
Overview
B&B Electronics Elinx family of Industrial rack mount Ethernet switches
have been designed to meet light and heavy Industrial communication
requirements.
The ESW726 Managed family offers a variety of Industrial models. The
switch configurations range from 26 ports RJ45 copper to RJ45 copper with
multi mode, single mode, and or SFP gigabit ports.
Two ports can be used for network redundancy by implementing our
RingOn technology. RingOn has been developed to provide a rapid
recovery system for Industrial networks. If any part of the ring disconnects
the network communications will automatically be restored by RingOn
technology.
All RJ45 copper ports support auto-negotiation, 10/100Mbps data rate,
full/half duplex, flow control and auto MDI/MDIX. The Elinx switches
provide advanced management functions such as: RingOn
TM
, VLAN,
Trunking, QoS (Quality of Service), IGMP Snooping, Port Rate Control,
Port Mirroring, Static Mac Address Forwarding Table, SNMP (Simple
Network Management Protocol), Diagnosis, Email/Relay fault warning and
field Firmware Update.
The ESW726 Series will support IEEE 802.3 (10Base-T), IEEE 802.3u
(100BaseTX) and (100BaseFX), 802.3ab 1000Base(X), IEEE 802.3z for
1000BaseSX/LX/LHX/ZX, 802.3x for flow control, full and half duplex,
MDI/MDIX auto-sensing.
The ESW726 series accepts 18VDC to 36VDC input voltage using terminal
blocks. The operating temperature range for standard models are -10
˚C to
60
˚C
with wide temperature models supporting -40
˚C to 75˚C
. The ambient
relative humidity rating is 5 to 95% (Non-condensing).
