14
Integrated EL- Skyport Transceiver For Wireless Triggering – Setup
English
Group Settings
Frequency Channel Settings
EL-Skyport on / off
The EL-Skyport on / off, Group, Frequency Channel can be customised.
Press the flash power up-down buttons together to enter into the “Advanced Feature Setup”
Display shows
Change settings with the flash power up-down buttons
r.0
EL-Skyport off
r.1
EL- Skyport on
r.2
EL-Skyport speed mode (only available with EL-Skyport Speed mod-
ules )
After 3 to 4 seconds the settings are saved automatically and the display shows the flash power
setting.
Press the flash power up-down buttons together to enter into the “Advanced Feature Setup”.
Then, scroll to G.1 using the Prop/Free button.
Display shows
Select Group with the flash power up-down buttons
G.1
Group 1 (standard setting)
G.2
Group
2
G.3
Group
3
G.4
Group
4
After 3 to 4 seconds the settings are saved automatically and the display shows the flash power
setting.
Press the flash power up-down buttons together to enter into the “Advanced Feature Setup”.
Then, scroll to F.1 using the Prop/Free button (only use in cases of interference with
other systems).
Display shows
Change the Channel with the flash power up-down buttons
F.1 to F.8
Select Frequency Channel from 1 – 8.
Note: The transmitter must have the same Frequency Channel
setting. Standard setting is Frequency Channel 1.
After 3 to 4 seconds the settings are saved automatically and the display shows the flash power
setting.
Power Steps Per Push
Press the flash power up-down buttons together to enter into the “Advanced Feature Setup”
Then, scroll to i.1 using the Prop/Free button.
Display shows
Select values with the flash power up-down buttons
i.0
+/- 1f-stop
i.1
+/- 1/10 (standard setting)
i.2
+/- 2/10
i.3
+/- 3/10
i.4
+/- 4/10
i.5
+/- 5/10
After 3 to 4 seconds the settings are saved automatically and the display shows the flash
power setting.