Eliminator Lighting Mini Par UV LED, User Manual, Page: 7 / 16

7
S A F E T Y G U I D E L I N E S
DO NOT position device s close to any FLAMMABLE MATERIALS while operating.
DO NOT attempt installation and/or operation of devices without knowledge how to do so.
DO NOT permit operation by persons who are not qualified to operate th ese type s of device s .
DO NOT
shake device s , avoid brute force when installing and/or operating.
DO NOT
operate these devices if the main power cord has become frayed, crimped and/or
damaged. Replace any damaged power cords with a similar power rating.
DO NOT
remove or break - off the ground plug from the device power cord s .
DO NOT remove disassemble de vice s , there are NO user serviceable parts inside.
ALWAYS
disconnect devices from main power source before performing any cleaning.
ALWAYS disconnect light from main power before replacing lamp.
ALWAYS
be sure to install these devices in an area that will allow proper ventilation.
NEVER
remove the ground prong from the power cable.
Power cords should be safely routed and secured so they are not likely pinched.
Disconnect power cords during long periods of non-use.
Only use recommended rigging hardware as described in this guide.
Use the original packaging and materials to transport the se device s in for service.
Th ese device s should be serviced by qualified service personnel when:
•
The power cords or plugs have become damaged.
•
Objects have fallen on and/or liquid has spilled into the devices.
•
The devices have been exposed to rain and/or moisture.
•
The devices do not operate normally or exhibit a marked change in performance.