Eliminator Lighting Mini Par UV LED, User Manual, Page: 10 / 16

10
I N S T A L L A T I O N I N S T R U C T I O N S
FLAMMABLE MATERIAL WARNING
Keep devices minimum 5.0 feet (1.5m) away from flammable materials and/or pyrotechnics.
ELECTRICAL CONNECTIONS
A qualified electrician should be used for all electrical connections and/or installations.
DO NOT INSTALL THE DEVICES IF YOU ARE NOT QUALIFI ED TO DO SO!
OVERHEAD RIGGING REQUIRES EXTENSIVE EXPERIENCE, INCLUDING AMONGST OTHERS
CALCULATING WORKING LOAD LIMITS, INSTALLATION MATERIAL BEING USED, AND
PERIODIC SAFETY INSPECTION OF ALL INSTALLATION MATERIAL AND THE MOTOR.
IF YOU LACK THESE QUALIFICATIONS, DO NOT ATTEMPT THE INSTALLATION YOURSELF.
IMPROPER INSTALLATION CAN RESULT IN BODILY INJURY.
BEFORE RIGGING/MOUNTING DEVICES TO ANY METAL TRUSS/STRUCTURE OR CEILING, A
PROFESSIONAL EQUIPMENT INSTALLER MUST BE CONSULTED TO DETERMINE IF THE METAL
TRUSS/STRUCTURE OR CEILING IS PROPERLY CERTIFIED TO SAFELY HOLD THE COMBINED
WEIGHT OF THE LIGHT FIXTURE1, CLAMPS, CABLES, AND ACCESSORIES.
BEFORE MOUNTING DEVICES TO ANY SURFACE OR STRUCTURE, MAKE SURE THE SURFACE
OR STRUCTURE CAN HOLD A MINIMUM POINT LOAD OF 10 TIMES THE WEIGHT OF THE DEVICES.
MAKE SURE SCREWS AND/OR ANCHOR BOLTS (NOT INCLUDED) FIT INTO MOUNTING HOLES!
FOR ADDED PROTECTION, MOUNT DEVICES IN AREAS OUTSIDE WALKING PATHS, SEATING
AREAS, OR IN AREAS WERE UNAUTHORIZED PERSONNEL CAN REACH THE DEVICES.
SECURE FIXTURE WITH A SECONDARY SAFETY ATTACHMENT, SUCH AS AN APPROPRIATE
SAFETY CABLE. (NOT INCLUDED)
NEVER STAND DIRECTLY BELOW THE DEVICES WHEN MOUNTING, REMOVING OR SERVICING.
DEVICES MUST ALL BE INSTALLED FOLLOWING ALL LOCAL, NATIONAL, AND COUNTRY
COMMERICAL ELECTRICAL AND CONTRUCTION CODES AND REGULATIONS.
INS T ALL A TION
The unit should be mounted using a mounting clamp (not p r ovided), affixing it to the mounting
bracket that is p r ovided with the unit. Always ensu r e that the unit is firmly fixed to avoid vibration and
slipping while operating. Always ensu r e that the structu r e to which you a r e attaching the unit is
secu r e and is able to support a weight of 10 times the unit ’ s weight. Also, always use a safety cable
that can hold 12 times the weight of the unit when installing the fixtu r e.
The equipment must be installed by a p r ofessional and it must be installed in a place whe r e it is out
of the r each of people ’ s grasp.
Ensu r e ALL connections and end caps a r e p r operly sealed with nonconductive dielectric g r ease
(available at most electrical suppliers) to p r event water ing r ess/condensation and/or cor r osion.