Eliminator Lighting INDY HEX PAR User Manual Download Page 22

22

 

T R O U B L E   S H O O T I N G   T I P S

 

The light does not turn ON

 

If using AC power: 

1.

 

Confirm the AC power cord from the light is not damaged or cut. 

2.

 

Ensure that the Load Switch is in the ON position and battery switch is in the OFF position. 

If using Battery Power 

1.

 

Please ensure that the battery is charged and battery load is activated (see page 16 for 
instructions on enabling the battery load). 

If none of these solutions work, please contact Eliminator Lighting. 
 
 
 

F R E Q U E N T L Y   A S K E D   Q U E S T I O N S

 

Listed below are a few answers to common questions users may have. 

1. Does the light come with a power “first” and DMX “first” cable? 

Each fixture has a power “first” cable included however; the DMX “first” cable is not.  
To purchase additional cables or accessories, please visit 

www.adj.com. 

 
2. What is the battery voltage and capacity? 

The battery has a voltage of 22.4V and a capacity of 4.4AH.  
The battery also weighs 1.25 lbs. (.56kg) 
 

3. What is the battery life? 

The battery will last for up to 6 hours (full on) on a full charge. In energy saving mode, the battery 
can last up to 8 hours on a full charge. 
 

4. What is the height with the kickstand extended? 

The height is 9.25” (235mm) with the kickstand extended. 
 

5. Are battery replacements available? 

For battery replacements, please contact Eliminator Lighting customer service.  
 
 
 

O P T I O N A L   A C C E S S O R I E S

 

 

 

Order Code

 

Description

 

PWR793

 

Power Bar with six 3-prong Edison sockets. 

PWR571

 

POW-R BAR65 utility block w/ surge protected AC sockets and USB. 

RFR044

 

RF (radio frequency) wireless remote control. 

 

 

 

Summary of Contents for INDY HEX PAR



























Reviews: