Eliminator Lighting INDY HEX PAR, User Manual, Page: 16 / 26

16
O P E R A T I O N
Indy Hex RF:
This function is used to activate and deactivate the Indy Hex RF (Sold Separately).
When this function is activated you can cont r ol the fixtu r e using the Indy Hex R F . Please see the
next page for Indy Hex RF cont r ols and functions.
1.
Plug the fixtu r e in and p r ess the MODE button until “OPTION” is displayed
.
2. P r ess the SET UP button until “RFXX” is displayed. “XX” r ep r esents either “ON” or “OFF”.
3. P r ess the UP or DOWN buttons to either activate the r emote function (On) or deactivate it
(O f f).
Sky Wi r e Add r ess Setting/Sky Wi r e On/O f f:
This function is used to set the Sky Wi r e add r ess
and activate/deactivate the Sky Wi r e function. The add r ess must match the add r ess that is set to
your wi r eless cont r olle r .
1. Plug the fixtu r e in and p r ess the MODE button until “WIFI SET ADDR: XX” is displayed
.
“XX”
r ep r esents a number between 00 - 14.
2. Use the UP or DOWN buttons to find and set your desi r ed Sky Wi r e add r ess. The add r ess
must match the add r ess that is set to your wi r eless cont r olle r .
3. After you have found and set your add r ess, p r ess the SET UP button to activate Sky Wi r e.
“WIFI SET S TA T : XXX” will now be displayed. Use the UP or DOWN button to set the display
to “On” to activate Sky Wi r e. T o deactivate Sky Wi r e set the display to “O f f”.
DMX State:
This mode can be used as a p r ecaution mode, that in case the DMX signal is lost, the
operating mode chosen in the setup is the running mode the fixtu r e will go into when the DMX
signal is lost. Y ou can also set this as the operating mode you would like the unit to r etu r n to when
power is applied.
1. Plug the fixtu r e in and p r ess the MODE button until “DMX MODE ADDR:XXX” is displayed .
2. P r ess the SET UP button until “DMX MODE NO: XXXX” is displayed. “XXXX” r ep r esents the
cur r ent DMX state that is displayed.
3. Use the UP or DOWN buttons to select the operating mode you would like the unit to start
up in when power is applied or the DMX signal is lost.
•
AUTO - If the DMX signal is lost or power is applied, the unit will automatically into Auto Run.
•
BLACK - If the DMX signal is lost or power is applied, the unit will automatically go into stand by
mode.
•
HOLD
- If the DMX signal is lost the fixtu r e will stay in the last DMX set up. If power is
applied and this mode is set, the unit will automatically go into the last DMX set up.