Eliminator Lighting Decor XV, User Manual, Page: 10 / 18

10
I N S T A L L A T I O N I N S T R U C T I O N S
FLAMMABLE MATERIAL WARNING
Keep devices minimum 5.0 feet (1.5m) away from flammable materials and/or
pyrotechnics.
ELECTRICAL CONNECTIONS
A qualified electrician should be used for all electrical connections and/or
installations.
DO NOT INSTALL THE DEVICES IF YOU ARE NOT QUALIFIED TO DO SO!
USE CAUTION WHEN HANDLING! THE LIGHTING LENSES ARE FRAGILE,
AND EVEN GENTLE PRESSURE MAY BE SUFFICIENT TO DISLODGE THEM
FROM THEIR SOCKETS!
FOR ADDED PROTECTION, INSTALL DEVICES IN AREAS OUTSIDE WALKING PATHS, SEATING
AREAS, OR AREAS WERE UNAUTHORIZED PERSONNEL CAN REACH THE DEVICES.
DEVICES MUST ALL BE INSTALLED FOLLOWING ALL LOCAL, NATIONAL, AND COUNTRY
COMMERICAL ELECTRICAL AND CONSTRUCTION CODES AND REGULATIONS.
ELECTRICAL CONNECTIONS
Each of the illuminated letters included in the kit features one electrical lead with a 5-pin male
connector and one electrical lead with a 5-pin female connector. The letters should be arranged in the
proper order, then their electrical leads may be daisy-chained together. The male connector lead on
the first letter (the letter “X” in the example shown in the diagram below) should then be connected to
the 5-pin female connector on the power supply. Please refer to the diagram below.
NOTE: THE FEMALE CONNECTOR ON THE LAST LETTER WILL NOT BE USED.