Eliminator Lighting Amber Fog 700 LED, Instruction Manual

Page: 3 / 3

- 3 -
Maintenance
Refilling the fluid reservoir should be done carefully. Remove the plug from the mains first! Then unscrew the
cap of the reservoir and fill it by means of a suitable funnel. Use only the original smoke liquid . This fluid
is environmentally friendly, biodegradable and leaves no residue when used correctly. Make sure the smoke
liquid to become contaminated, close the cap of the liquid smoke can and after filling tank right.
After 40 hours, the smoke machine must be cleaned to avoid deposits in the machine, pump and heater.
Clean procedure
Run clean procedure in a well-ventilated area
Remove smoke liquid from the tank, add cleaning solution to tank
Switch smoke machine and wait until it is warm up
Press the button to switch the liquid pumped through the machine
Perform the above operation until the tank is empty
Fill the tank with liquid smoke
Specifications
Power supply: ........................................................... 230V~/50Hz
Heating element: ........................................................... 700 watts
Heat up time: ................................................................ 3 minutes
Smoke production: ............................................ ca. 75 m3/minute
Tank capacity: ................................................................. 0,5 liters
Dims: ............................................................. 250 x 160 x 140mm
Weight .................................................................................2.5 kg
Do not attempt to make any repairs yourself. This would invalid your warranty.Do not make any changes to the unit. This woul
d also
invalid your warranty.The warranty is not applicable in case of accidents or damages caused by inappropriate use or d isrespect of the
warnings contained in this manual.sinfen cannot be held responsible for personal injuries caused by a disrespect of the safety
recommendations and warnings. This is also applicable to all damages in whatever form.
1 Year Limited Warranty:
Eliminator Lighting warranty is valid from the date of purchase. Our
1 year limited warranty covers manufacturing defects only. Serial number, place of purchase with
dated valid receipt must be submitted at time of service. Eliminator Lighting warranty does not cover
items or parts prone to wear and tear: lamps, fuses, brushes and belts. Eliminator Lighting warranty
is only valid with-in the United States.
WARRANTY