13
English
6.
There are pictograms on the top of the large protective cover.
This is a visible spot that can be seen from every angle of the
machine. It pertains to a number of significant risks and is a
constant reminder for the operator of a number of obligations
and responsibilities:
• This pictogram reminds the operator that bystanders must re-
main at a safe distance of 10 m to ensure their safety.
• This pictogram warns of the general danger of projectiles. The
blades rake the ground surface clean, whereby projectiles can
fly out at high speed. Wearing suitable protective clothing and
keeping a safe distance is therefore advised.
• This pictogram pertains to the risk of foot injuries. This is a seri-
ous hazard if the operator’s foot comes under the housing of the
machine when the blades are rotating. As such, keep your feet at
a safe distance from the machine.
• Via recognisable pictograms, the sticker requires that suitable
protective clothing is worn: safety goggles to protect the eyes.
Hearing protection to avoid hearing damage during prolonged
exposure. Wearing gloves is an essential basic protection.
• The final pictogram instructs the operator to read the manual
before using the machine, to avoid any incorrect handling which
could be dangerous for themselves and for and others.
This sticker bears order code: BQ 505 010 550.
7.
This sticker is affixed to the rear cover. The black-yellow shading
draws attention to this risk zone. The pictograms warn of a num-
ber of dangers in the area behind the anti-projection cover and of
the risks associated with lifting it:
• There is a risk of injury from dirt, sand and stones being ejected.
• Sturdy safety shoes must always be worn.
• Eyes must always be protected with safety goggles.
This sticker bears order code: BQ 505 010 700.
8.
This sticker is affixed to the side of the cover near one of the
fixing bolts. This sticker warns of the danger of pinching, cutting
or bruising fingers if they are caught by the drives shielded by
the cover. The engine must always be switched off before the
protective cover is removed.
The machine must never be operated if the protective cover has
not been fitted correctly.
This sticker bears order code: BQ 505 010 660.
Caution:
If due to cleaning or use, safety stickers or parts displaying safety
information have been damaged, removed or become illegible, they must be
replaced immediately. Stickers and parts can be obtained from your official
ELIET dealer.
