13
Replacing the light bulb
CAUTION
Before replacing the lamps, switch power off at service panel
and lock service panel disconnecting means to prevent pow-
er from being switched on accidentally.
NOTE: Turn off the lights and fan. Allow the lights to cool be-
fore handling. If new lights do not operate be sure lights are
inserted correctly before calling service.
Replace Lights
Remove the inner lamp lens cover by inserting a small
flat blade screwdriver into each of the three slots and
gently prying it free.
NOTE: Do not remove the outer trim ring (lamp assem-
bly).
Grasp the bulb and pull it straight out.
Replace with 12 volt, 20 watt halogen bulbs with a G4
base SUITABLE FOR USE IN OPEN LUMINAIRES.
Follow package directions, wear gloves, do not touch
bulb with your bare fingers.
Replace inner cover by inserting the three retaining tabs
into the three slots and presing them firmly in place.
•
•
•
•
Bulb
Charcoal Filter
If the model is not vented to the outside, the air will be recir-
culated through disposable charcoal filters that help remove
smoke and odours.
The charcoal filters cannot be cleaned.
They must be replaced.
The charcoal filters are clipped inside of each metal grase
filter (mounting instructions included with charcoal filters kit)
The charcoal filters should be replaced every 4-6 months
(depending on hood usage).
NOTE:
DO NOT rinse, or put charcoal filters in an automatic
dishwasher.
NOTE:
Charcoal filters are not included with the hood.
They must be ordered from your supplier.
Order the needed kit specifying your hood model and width
size.
Charcoal filter placement (Recirculating accessories)
Fit the charcoal filter mattress on the upper side of each
grease filter.
Use provided springs to fix it in place.
Note:
When removing for replacing for a new one do not
remove Fixing Springs, simply pull out one and rotate aut-
wards.
Fixing spring
Charcoal filter
Grease filter
top side
Summary of Contents for Hood
Page 41: ...LI3Y8A Ed 04 10 ...
