8
O
O
p
p
e
e
r
r
a
a
t
t
i
i
o
o
n
n
M
M
a
a
n
n
u
u
a
a
l
l
5.
Prerequisites for safety
5.1
Preparation before use
-. Do not operate under direct sunlight or too strong lights
-. Do not store alcohol, thinner and other flammable vapors and liquids in the vicinity
of this equipment.
-. Check the voltage.
-. Check printing papers are ready
-. Check chin rest is working properly
-. Remove dusts, especially on the lens.
5.2
Preparation when you use
-. Place this equipment plain
-. Do not put others on this equipment
-. Do not disassemble or modify on your own
-. Stand 40 minutes and get it worked if it is stored at extended temperate place
-.
Keep it away from other persons but qualified technician.
-. Be sure to unplug if do not use long.
-. Do not turn off the instrument before finishing initialization.
(Don’t power off during loading)
5.3
Instruction and operation sequence
-. Please connect the power plug.
-. Pre
ss “ON”
-. Put the chin on chin rest and make forehead stuck on to forehead rest
-. Release stage by turning stage knob
-. Press buttons what you want
-. Try to get it worked as per the instructions of 5 and 7
5.4
Storage after use
-. Cover it up and unplug if do not use long
-. Clean with soft cloth, soaped and rinse, wipe dry
-
. Wipe lens and glass’ dusts out with wind blower and with soft cloth.
-. Fix by turning the fixation knob and keep it plain when you are about to move or lift up
-. Do store at the following place
①
Not humid place
②
Not in the vicinity of water
③
Not dusty and not in the vicinity of filthy place with salt or sulphur
④
Plain place
⑤
Not in the vicinity of vibration or shock
⑥
Not in the vicinity of other flammables vapors or liquids
⑦
Not in the vicinity of direct sunlight
-. Store the accessories and cords for next operation.
