Elgo FMAX2 Series, Operating Manual

Page: 9 / 28

Product Features
- 9 -
5.4 Absolute Measuring Principle
With the absolute measuring principle, the current position value is always present. No data is lost even in the
event of a power failure. In the installed condition it is generally recommended to calibrate the measuring sys-
tem once. Afterwards no further calibration is required.
5.5 Optional Incremental Signal Outputs
On request, the FMAX2 / FMAX3 measuring system can optionally be equipped with incremental HTL, TTL or
SIN/COS output signals, which can be used for speed evaluation in addition to the position measurement.
More details can be found in chapter
 9 Optional Incremental Outputs.
6 Technical Data
6.1 Identification
The type label serves for the identification of the unit. It is located on the housing of the device and indicates the
exact type designation (=order reference

12) with the corresponding part number. Furthermore, the type
label contains a unique, traceable device number. When corresponding with ELGO please always indicate this
data.
6.2 Dimensions Sensor
Figure 3: Dimensions FMAX2/3 sensor
50
41 24
26
4
4
4
4
6
Ø 3.3
Ø 3.3