12
12.1 Pin-Assigment Z58-654
Addional sheet for 115 or 230 VAC power supply
Please Note! The following functions are not available with the AC-Variant!
1. Encoder Systems
2 = A/A’ B/B’ Z/Z’ 24 VDC Encoder supply, 5 V-TTL (PNP)- 100 KHz
3 = A/A’ B/B’ Z/Z’
5 VDC Encoder supply, 5 V-TTL (PNP) - 100 KHz
4 = Modulated for connection with ELGO – FMAX linear encoder
5 = Modulated for connection with ELGO – EMAX linear encoder
6 = SSI interface
8 = A/A’ B/B’ Z/Z’ 24 VDC Encoder supply, 5 V-TTL (PNP) - 500 KHz
9 = A/A’ B/B’ Z/Z’
5 VDC Encoder supply, 5 V-TTL (PNP) - 500 KHz
2. Options
R = 2 shutter relay outputs (24 V/1 A)
C = Analog input 0... 10 V (in preparation)
E = Analog input 0... 20 mA (in preparation)
F = Analog output 0... 10 V
G = Analog output 0... 20 mA
H = Analog output 4... 20 mA
Basically the AC variant is offered for replacement of the parent Z54 type. Owing to place require-
ment the functions described above are not realizable here. If these functions are although neces-
sary, a standard 24 VDC Z58 should be used. Alternatively the external ELGO Power Pack NG13.0 is
useful, if no 24 VDC voltage is available in the switch cabinet.
Connections:
Encoder ST 1
put Terminal ST 2
Pin 1 = 0 V
n 1 = Screen
Pin 2 = + 24 VDC out
n 2 = 0 V
Pin 3 = A out
n 3 = + 24 VDC out
Pin 4 = B out
n 4 = Tool Offset input
Pin 5 = Screen
n 5 = Reference input
n 6 = Reset input
Note: All inputs are active „high“ (+ 24 VDC / PNP)
AC - Power Supply ST 3*
Pin 1 = L1
Pin 2 = N
Pin 3 = PE
* ST3 is not applicable with
Option AG (built on housing).
In this case, a separate power
plug is included in the delivery.
* Only with
option AG
(external
power plug)
