Simple Mounting
The tape is simple to attach to the machine (e.g. by means of double sided sticky tape). Due to its
high flexibility it can cope with uneven surfaces ore radii without affecting accuracy. A second steel
tape is fitted on top of the magnetic tape, to protect it. The equipment will operate satisfactorily
with a measuring gap of 0.1 to 2.0 mm.
Protection Class
The magnetic measuring system offers the greatest protection against hostile environments.
Sensor and tape are protected to IP65.
Connections
Connections are by means of simple plug in connectors. This connector are readily removable and
easily wired.
+ 15… 30 VDC
RESET
SET
Power Supply
Schalter
- 0 V (GND)
1 2 3 4 5 6 7 8 9 10
Connector for Sensor
Parameter settings:
Jumper enabled
no jumper disabled
4
