ELGi EG 11, Operation And Maintenance Manual

Page: 72 / 183

20 21
Controller Manual
7.1.3 Day Report
Use
▲
,
▼
to select the Record number (1 to 30).
L- Load, St – Stop, UL – Unload, F- Fault, R- Run, Sby- Standby, STC – Start Count, LDC - Load Count
7.1.4 Service Time
7.1.5 Cumulative Time
7.1.6 VFD
If VFD is connected to the compressor and VFD port is connected, user can view the following parameters of VFD in Neuron II.
1. Voltage in V
2. Current in A
3. Frequency in Hz
4. Power in KW
5. RPM
6. Status of the VFD
LEVEL 1 LEVEL 2 LEVEL 3
View Day report Date: DD/MM/YY
L: X X Hours St: X X Hours
UL: X X Hours F: X X Hours
R: X X Hours Sby: X X Hours
STC: X X X LDC: X X X X X
LEVEL 1 LEVEL 2 LEVEL 3
View Service time Remaining AFCT: X X X X hours
Remaining OFCT: X X X X hours
Remaining OSCT: X X X X hours
Remaining OCT: X X X X hours
Remaining RGT: X X X X hours
LEVEL 1 LEVEL 2 LEVEL 3
View Cumulative time Load X X X X X X hrs: X X Min
Unload X X X X X X hrs: X X Min
Run X X X X X X hrs: X X Min
Stop X X X X X X hrs: X X Min
Fault X X X X X X hrs: X X Min
Standby X X X X X X hrs: X X Min
Start Count X X X X X X
Load Count X X X X X X X X X
Utilisation X X %