10
CUSTOMER SUPPORT TEAM:
+44 (0) 333 220 6057
Cleaning and care
Caution:
Do not immerse the appliance, cord
or plug in water.
Not dishwasher safe.
Always unplug this sandwich maker from
power source and wait until it cool down before
cleaning.
There is no need to take your sandwich maker
apart for cleaning. Dry with a paper towel to
absorb excess oil. Brush crumbs from the
grooves, and wipe with damp cloth and mild
soap.
Never immerse in water. Avoid using scratching
or sharp utensils, as they will scratch the non-
stick surface.
Do not use cleansers or oven cleaners on the
heating plates.
To clean handles and other parts, use a damp
cloth with mild soap.
Should any filling be difficult to remove, pour
a little cooking oil onto the plate and wipe off
after 5 minutes, when the filling has softened.
IMPORTANT!
Allow to dry fully after cleaning before using
again.
Do not use the appliance if damp. Ensure the
appliance is completely clean and dry before
storing.
This appliance requires little maintenance.
It contains no user serviceable parts.
Do not try to repair it yourself. Refer it to
qualified personnel if servicing needed.
Storage
1. Unplug power cord from the power outlet
and clean as above.
2. Allow the appliance to dry fully.
3. Store on a flat, dry level surface out of
reach of children.
Troubleshooting & FAQs
Do the indicator
lights show when my
sandwich is done?
No. The indicator lights only indicate power, and that the sandwich maker
has reached the correct temperature. Ensure you do not leave the sand-
wich maker during use.
How long will it take
to make a toasted
sandwich?
We recommend toasting your sandwiches for around five minutes.
Generally the sandwiches will be ready approximately 3 – 6 minutes after
adding them to the sandwich maker, depending on your preference.
Why are my fillings
spilling over during
cooking?
You may have added too many fillings to your sandwiches. Ensure that
no fillings are ‘overflowing’ when you add the sandwich to the Sandwich
Maker. Fillings such as cheese and jam reach very high temperatures
when heated and can spill over.
WARNING:
DO NOT IMMERSE ANY PART OF THE
APPLIANCE IN WATER
