8
CUSTOMER SUPPORT TEAM:
+44 (0) 333 220 6057
CLEANING AND CARE
It is important that you clean the appliance after
each use to prevent an accumulation of grease
and avoid unpleasant odours.
Excess grime may also increase the cooking
times.
Allow the appliance to cool and unplug from
outlet before cleaning.
Do not use abrasive cleaners or sharp utensils
to clean the oven, as scratching may weaken it
and cause shattering.
Inner:
Wipe the inside of the Mini Oven with a
hot, damp sponge cloth. Dry before next use. A
mild spray or oven cleaner can be used. Apply
to the sponge, not the oven.
Outer:
Clean outside of appliance with a damp
sponge and dry with a clean towel.
Door:
Wipe the glass with a hot damp sponge.
Clean the glass with a glass cleaner spray if
desired. Dry with a clean towel.
IMPORTANT!
Do not use the appliance if
damp. Ensure the appliance is completely clean
and dry before storing.
Storage:
Unplug power cord from the power
outlet and clean as instructed.
Store on a flat, dry level surface out of reach of
children.
TROUBLESHOOTING & FAQS
When you are finished with the appliance,
switch it off and turn it off at the wall socket.
Remove the plug, then allow time to cool.
(Refer to cleaning section below)
Problem
Solution
Food is cooking
too slowly,
too quickly, or
burning
The oven temperature
may be too low or high.
If food is cooking too
quickly, try lowering the
shelf. If food is cooking
too slowly, move the shelf
up.
Steam is
coming from the
oven
This is a normal
occurrence when cooking
foods with high water
content. Take care when
opening the oven as
steam may escape when
you open the door.
The oven is not
cooking evenly
Check you are using
the correct temperature
for the recipe as the
temperature may be too
high.
The food/dish may not
be placed centrally on
the tray.
There is a smell
of burning in the
oven
There may be a build-up
of grease in the oven or
on the wire rack. Always
wipe down the oven
inside after use, once it
has cooled completely. Al-
ways wash the wire rack
after each use to remove
any grease build-up.
WARNING:
DO NOT IMMERSE ANY ELECTRICAL PART
OF THE APPLIANCE IN WATER SUCH AS
MOTOR UNITS OR PLUGS.
PLEASE SEE CLEANING SECTION FOR
FURTHER INSTRUCTIONS.
