ELGA
CENTRA-R 60/120 US Quick Start Manual
CENTRA-R 60/120 US MANU40589 Version 02 - 02/16
Page 7
4. CONSUMABLE INSTALLATION
4.1 Protek L1 or L2 Pre-treatment cartridge
1.
SCREEN prompt to install Protek pre-treatment
cartridge (LC175 / LC177).
2.
OPEN front doors and locate the Protek L1 / L2
cartridge position as shown.
3.
LIFT wing (1) and rotate anti-clockwise.
4.
PIVOT latch (2) to release retaining arm (3).
5.
SWING retaining arm (3) fully open.
6.
REMOVE sealing blanks on connector manifold.
Installation of Protek cartridge
Protek L1 or L2 acceptance screen
7.
REMOVE Protek
pre-treatment cartridge (LC175 /
LC177) from packaging.
8.
REMOVE sealing plugs from inlet and outlet ports.
9.
WET O rings located inside the ports.
10. ALIGN Protek cartridge (4) on guide rails and SLIDE
into place until it is fully engaged.
11. CLOSE retaining arm (3).
12. PIVOT latch (2) back and ROTATE wing (1)
clockwise to secure.
13. Press
✓
to continue.
WARNING!
ENSURE CLAMP IS SECURED BEFORE
STARTING THE UNIT.
Summary of Contents for CENTRA-R120-US
Page 1: ...CENTRA R 60 120 US Quick Start Manual ...
Page 2: ......
