Procedure A
A-1 Inspect All Manuals
Storing the operation manual and the maintenance
manual in appropriate place is of great importance to
the safe operation of the machine. The manuals shall
be stored in the dedicated storage box on the platform.
The illegible or damaged manuals could not provide
necessary safety and operation information for safe
operation.
1.
Inspect and confirm that the document box is
placed on appropriate position of the platform.
2.
Inspect and confirm that the operation manual
and the maintenance manual are stored in the
storage box on the platform properly.
3.
Inspect the pages of the manuals and confirm that
they are legible and intact.
4.
Return the manual into the storage box after use.
If needing to replace the
manual, please contact
with Hunan SINOBOOM Heavy Industry Co., Ltd.
A-2 Inspect All Labels
Maintaining all safety and prompt labels properly is of
great importance to the safe operation of the machine.
The labels are used to prompt the operator the
potential risks in the operation process, and
meanwhile provide operation and maintenance
information to the user. The illegible labels could not
guide the operator properly, and might result in unsafe
operation.
1.
Consult to the label section in the “GTJZ0407SE
Operation Manual” and determine the correct
positions of the labels according to the label list
and chart.
2.
Inspect whether all labels are legible and intact;
replace the damaged and illegible labels timely.
If needing to replace the
labels, please contact with
Hunan SINOBOOM Heavy Industry Co., Ltd.
A-3 Inspect Damaged, Loose or Lost Parts
Inspecting the condition of the machine daily is of
great importance to the safe and reliable operation of
the machine. It would lead to unsafe operation if the
damaged, loose or lost parts have not been found and
repaired timely.
Observe the entire machine and check whether any
parts are damaged, installed improperly or lost,
including:
Electrical components, wirings and cables
Oil tank, fittings, hoses, hydraulic cylinders and
valve blocks
Storage battery pack and its connection
Connection between the drive motor and the
rear wheel
Tires and its fastening nuts
Power unit
Limit switch and horn
Alarms and indicator lamps
Nuts, bolts and other fasteners
Intermediate hurdles of entrance or door for
platform
Pit-hole protector
Extended zone of platform
Pivot of scissors arm and fastener
Platform joystick
Fastening bolts on the sliding block of the
platform
Attention
Attention
10
GTJZ0407SE
Maintenance Manual
