EN
22/08/22
User Manual Resistance Meter 30A/2
–
60A/2
–
80A/2 62000640_08_
4
Elettrotest Spa
P,zza R.Riello 20/B
45021 Badia Polesine (RO)
Italy
+39 042553567
After sale support
Thank you for purchasing the RESISTANCE METER.
RM30/2, RM60/2 and RM80/2 are professional instruments which allows to measure the stator
windings resistance of three-phase or single-phase motors, or of another alternating load during
the working.
Responsibility:
Elettrotest disclaims any responsibility for damage to people or things
caused by an improper use of its products.
Mandatory
-
Verify voltage, power and frequency compatibility between Resistance Meter range and
electrical specification of equipment under test (EUT).
-
Electrical components of the system must be suitable for the rated voltage and current of
RESISTANCE METER model
-
The electrical components, which by construction cannot support external influences,
can only be used on condition that adequate additional protection has been provided
with automatic disconnection protection.
Notes:
This manual lists precautions and information about operating procedure of device.
The content of this manual is subject to change without prior notice because of continuing
im
provements on the instrument’s
Should you have any questions or find any error please contact us by email.
Copying or reproducing all or any part of the contents of this document is strictly
prohibited, without Elettrotest permission
Version:
This manual is written for
Resistance Meter version 00_
and higher.
To consult older manual versions, please contact our support at
