elero TempoTel 28 260.0001 Operating Instructions Manual Download Page 15

Troubleshooting

GB-27

DE-28

DE

Troubleshooting/
General declaration of conformity 

Troubleshooting

Problem

Cause

Remedy

Roller shutter does 

No end limit position     Set the end limit

not move to the end 

is set.

position via PROG END

limit position.

LIMIT SETTING.

The transmitter does  Power supply was 

Press RESET button 

not respond after 

winterrupted for too 

and check setting.

battery replacement.

long.

General declaration of conformity:

The company elero GmbH hereby declares that the TempoTel device
complies with the basic requirements and other relevant provisions
of the European Directive 1999/5/EC.

Troubleshooting

Problem

Cause

Remedy

Drive is not

1. Receiver is outside 

1. Reduce the distance

functioning.

the radio range.

to the receiver.

Transmission control 
light is illuminated.

2.Transmitter has not

2. Programme the 

been programmed 

transmitter.

into the receiver.

3. Wrong group has 

3. Select correct

been selected.

group.

Transmission control 

Batteries are low.

Insert new batteries.

light is not
illuminated.
BATTERY is flashing 
on the display.

Astro function is not

1. Date is incorrect.

1. Set correct date.

functioning properly.

2. Wrong city or wrong   2. Set correct city    

latitude/longitude    

or exact degrees

setting.

latitude/longitude.

3. Holiday function is  

3. Switch holiday

switched on.

function off.

4. Astro shift is set.

4. Adjust astro shift.

ist eingestellt.

anpassen.

The TempoTel does 

The sliding switch is set Change the sliding 

not carry out the 

to manual      operation. switch to automatic 

programmed control 

mode.

commands.

The TempoTel does 

Holiday function is 

Switch holiday 

not carry out the 

switched on.

function off.

switching commands 
precisely.

Summary of Contents for TempoTel 28 260.0001

















Reviews: