Problem / Error Possible cause Remedial
action
• Drive does not
accept pro-
grammed end
positions
• Random travel
• Travel to end
position or limit
stop too short
• Delete end
positions,
re-program
end positions
• Drive must
move, stop
briefly and
continue its
travel (as long
as a button
on the assem-
bly cable is
pressed).
Fig. 11 Troubleshooting for the SunTop
7
Servicing
The SunTop is maintenance-free.
8
Cleaning
WARNING
Risk of injury due to electric current.
Risk of electric shock.
►
Potential hazard due to live parts.
►
Clean only in de-energised state. To do this, switch the
drive cable so it is de-energised.
►
Only clean the surface of the product with a clean, soft,
dry cloth.
9
Repairs
Please contact your specialist if you have any questions.
Please always provide the following information:
• Item number and designation on the type plate
• Type of fault
• Unusual events preceding fault
• Accompanying conditions
• Your own theories regarding the cause of the problem
10 Manufacturer's address
elero
GmbH
Antriebstechnik
Maybachstr. 30
73278 Schlierbach
Germany
Fon:
+49 7021 9539-0
Fax:
+49 7021 9539-212
www.elero.com
Please visit our website if you require a contact partner
outside Germany.
11 Disassembly and disposal
After unpacking, dispose of the packaging in accordance
with the valid regulations.
Dispose of the product in accordance with the relevant
regulations when you no longer need it. Disposal is partially
subject to applicable legal regulations. Bring the product to
be disposed of to authorised collection points only.
Environmental information
No superfluous packaging materials have been used. The
packaging can be easily separated into three material
types: cardboard (box), polystyrene (padding) and polyeth-
ylene (bag, protective foam).
The device is made of materials that can be reused if dis-
mantled by a specialist company. Please note the local
regulations on disposal of packaging materials and old
appliances.
On disassembly, additional dangers must be reckoned with,
which do not occur during operation.
WARNING
Risk of injury due to electric current.
Risk of electric shock.
►
Separate power supply cables physically and discharge
any energy accumulators still charged. After switching off
the device, wait at least 5 minutes so that the motor can
cool down and the voltage can be discharged from the
capacitors.
►
During disassembly work above head height, use suit-
able, inspected and structurally stable climbing aids.
►
Work on the electrics may only be performed by person-
nel described in the section “Safety notes on electrical
installation”.
Removal for scrap
The international, national and regional laws and regula-
tions prevailing at the time of scrapping the product must be
observed.
Ensure that materials and components are recycled, dis-
mantled and separated properly in addition to observing the
environmental and health hazards relating to recycling and
disposal.
CAUTION
Environmental damage in case of incorrect disposal
►
Electrical scrap and electronic components must be
handled as special waste and may only be disposed of by
approved specialist companies.
►
Groups of materials such as various types of plastics and
metals must be separated before recycling/disposal.
Disposal of electrical and electronic components
The disposal and recycling of electrical and electronic com-
ponents must be carried out in accordance with the relevant
laws and national regulations.
12 Notes on EC Declaration of Conformity
elero
GmbH hereby declares that this product is in compli-
ance with all applicable regulations of Machinery Directive
2006/42/EC. The full text of the EU Declaration of Conformi-
ty is available at the following Internet address:
www.elero.com/downloads-service/
.
Troubleshooting | Disassembly and disposal
©
elero
GmbH
EN | 9
