USA-12
USA-11
Intermediate position
Roller shutter/venetian blind
Adjustment Pos
B
Prerequisite:
The transmitter has been programmed.
1. Press the
DOWN
button twice
in quick succession
.
2. The drive will adjust the shutter curtain/venetian blind into the
stored intermediate position. If no intermediate position is
stored, the shutter curtain/venetian blind is automatically
adjusted into the lower limit position.
Adjustment Pos
V
(roller shutter)
Prerequisite:
The transmitter has been programmed.
1. Press the
UP
button twice
in quick succession
.
2. The shutter curtain is adjusted into the stored ventilation
position. If no ventilation position is stored, the curtain is
automatically adjusted into the upper limit position.
Adjustment Pos
V
(venetian blind)
Prerequisite:
The transmitter has been programmed.
1. Press the
UP
button twice
in quick succession
.
2. The blind is adjusted into the stored reverse position. If no
reverse position is stored, the blind is automatically adjusted
into the lower limit position.
Deleting Pos
B
1. Press the following buttons
simultaneously
:
•
DOWN
button
•
STOP
button
2. Keep these two buttons pressed until the LED goes out briefly.
Deleting Pos
V
1. Press the following buttons
simultaneously
:
•
UP
button
•
STOP
button
2. Keep these two buttons pressed until the LED goes out briefly.
US
A
Intermediate position
Roller shutter/venetian blind
Intermediate position roller shutter/venetian blind
Roller shutter
Venetian blind
Pos
B
Intermediate position
Intermediate position
Pos
V
Ventilation position
Reverse position
Programming Pos
B
Prerequisite
: The transmitter has been programmed and the end
limit positions have been set. The shutter curtain/
venetian blind is in the upper end limit position.
1. Adjust the shutter curtain/venetian blind into the desired
position using the
DOWN
button.
Note:
Keep the
DOWN
button pressed until the desired
position is reached.
2. When the shutter curtain/venetian blind has reached the des-
ired position, press the
STOP
button
in addition
.
The shutter curtain/venetian blind will come to a stop. The
intermediate position has been successfully programmed.
Programming Pos
V
Prerequisite:
The transmitter has been programmed and the end
limit positions have been set. The shutter curtain/
venetian blind is in the lower end limit position.
1. Move the shutter curtain/venetian blind in the UP direction
using the handheld transmitter until the ventilation slits are
open or the reverse position has been reached.
Note:
Keep the
UP
button pressed until the desired position is
reached.
2. When the shutter curtain/venetian blind has reached the
desired position, press the
STOP
button in
addition
.
The shutter curtain/venetian blind will come to a stop. The
ventilation/reverse position has been successfully programmed.