-6-
MOUNTING THE PC BOARD
Note: The holes in the two side panels have been punched differently. Be sure that you have the correct side
panel when mounting them to the PC board.
Mount the back panel using four 4-40 x 1/4” thread cutting screws (see Figure C).
Mount the PC board with four 4-40 x 1/4” machine screws (see Figure D). Do not tighten the screws.
4-40 x 1/4” Thread
Cutting Screws
4-40 x 1/4” Thread
Cutting Screws
Back Panel
Figure C
Right Side
Left Side
Figure D
4-40 x 1/4”
Machine Screws
4-40 x 1/4”
Machine Screws
Top Legend Side
of PC Board
Note: From the foil side of the PC board,
inspect the edges to be sure that there
are no component leads shorting against
the side panels.
Right Side
Left Side
