-29-
USERS DESCRIPTION OF FRONT PANEL
1. CLK - A 4 pin output block for the function generator’s square wave. The amplitude of the signal is 5Vpp
and the frequency is set by COARSE FREQ control.
2. TWO LOGIC SWITCHES - These are no bounce logic switches.
Give one signal state change per
movement of switch.
3. INPUT TERMINALS FOR LOGIC INDICATOR LEDs - “A” input corresponds with “A” lamp, etc.
4. LOGIC INDICATORS - Eight LEDs.
5. EIGHT DATA SWITCHES - Lets output of 5V or 0V depending on position.
6. OUTPUT TERMINAL - For all functions as stated. 4 pins per block.
1
2
3
4
5
6
