Elenco Electronics EDU-37723, Instruction & Assembly Manual, Page: 9 / 16

-8-
3. Stage
r Position the stage so the bottom is facing up, as shown in
Figure 8. Place the color wheel onto the shaft with the flat side
up. Attach the wheel using the a 2.5 x 5.5mm washer head
screw. Check that the wheel rotates and locks into each
positions.
r Mount the clips onto the square posts using 2.5 x 7.5mm pan
head screws, as shown in Figure 9.
Figure 8
2.5 x 5.5mm Washer
Head Screw
Color
wheel
Stage
Shaft
Figure 9
Clips
2.5 x 7.5mm
Pan Head
Screws
Square
post
r Using two 2.5 x 5.5mm washer head screws, attach the stage
assembly onto the arm (see Figure 10).
Figure 10
2.5 x 5.5mm Washer
Head Screws
EDU-37723_Manual_050115.qxp_Layout 1 6/22/15 3:14 PM Page 9