Elenberg MG-2525M, Instruction Manual

Page: 20 / 22

20
INSTALLATION
Turntable Installation
a. Never place the glass tray upside
down. The glass tray should never be
restricted.
b. Both glass tray and turntable ring
assembly must always be used during
cooking.
c. All food and containers of food are
always placed on the glass tray for
cooking.
d. If glass tray or turntable ring as-
sembly cracks or breaks, contact your
nearest authorized service center.
Countertop Installation
Remove all packing material and accessories. Examine the oven for
any damage such as dents or broken door. Do not install if oven is
damaged.
Cabinet: Remove any protective film found on the microwave oven
cabinet surface. Do not remove the light brown Mica cover that is
attached to the oven cavity to protect the magnetron.
INSTALLATION
1. Select a level surface that provide enough open space for the
intake and/or outlet vents.
A minimum clearance of 7.5cm
is required between the oven and
any adjacent walls. One side must
be open.
(1) Leave a minimum clearance of
30cm above the oven.
(2) Do not remove the legs from
the bottom of the oven.
(3) Blocking the intake and/or
outlet openings can damage the
oven.
(4) Place the oven as far away from radios and TV as possible.
Operation of microwave oven may cause interference to your radio
or TV reception.
2. Plug your oven into a standard household outlet. Be sure the
voltage and the frequency is the same as the voltage and the fre-
quency on the rating label.
WARNING: Do not install oven over a range cooktop or other heat-
producing appliance. If installed near or over a heat source, the
oven could be damaged and the warranty would be void.