Elenberg DVDP-2445, User Manual

Page: 5 / 24

Audio connection system
Stereo Audio
5.1CH Analog Audio
(Option)
Coaxial Digital Audio
Optical Digital Audio (Option)
Two types of audio output systems: analog
audio and digital audio. Analog audio includes 2-
channel stereo and Dolby AC-3 5.1 channel
output. Digital audio includes optical and coaxial
output.
Use a pair of AV cable (red for right /white for
left) to connect the stereo audio output of this unit
to the TV or a stereo input of power amplifier.
Use 3 pairs of AV cable to connect the 5.1
channel output of this unit to corresponding 5.1
channel input terminal ( No 5.1CH terminal in 2
channel DVD players )
Use the special coaxial cable to connect the
coaxial output of this unit to the coaxial input of
power amplifier.
Use the special optical cable to connect the
optical audio output of this unit to the optical
input of power amplifier.
Notes:
5.1CH analog Audio Input
L R
SL SR
SW CENTER
5.1C H AUDIO
DIGITAL AUDIO
COAXIAL OPTICAL
COAXIAL OPTICAL
Connection
R L
2CH Audio Output
R L
5.1CH Audio Output
Optical/ Coaxial Output
2CH Audio Intput Digital Audio Input
The physical connection should accord to the audio output setup of this unit. Please refer to
Audio Setup in System Setup .
System Setup
Press [SETUP] key for the screen to show the setup page. In setup mode, press [SETUP] key
again to quit the setup page. Press direction key to the desired item, and press [ENTER] to confirm.
(1) Some setup items are concerning the present modes. The items in gray can't be set up.
(2) The setup is memorized and will be kept after the power has been turned off.
MENU OPERATION:
TV Display:
4:3 PANSCAN:
When the unit connects to the normal TV set, the wide-screen image shows on
the full screen, but some part is cut off.
4:3 LETTERBOX: When the unit connects to the normal TV set, the wide-screen image shows
and black bars appear on the top and bottom of screen.
16:9: Use this item when the unit is connected with the wide screen TV set.
Wide-Squeeze : Use this item when the unit is connected to the wide-screen TV set.
ANGLE MARK:
It will show the ANGLE mark when playing DVD disc with multi-angle view if selection is ON.
OSD LANG:
Select on-screen display language.
CLOSED CAPTIONS:
This function doesn't work when the disc is without captions. If the caption is OFF, press
[SUBTITLE] key on the remote controller to turn the captions on.
SCREEN SAVER:
If the SCREEN SAVER is set ON and the unit is switched on without a disc playing for several
minutes, a moving picture appears on the screen and the unit will go to standby mode after 20
minutes. You can press the [STANDBY] key on the remote controller to activate.
LAST MEMORY:
When this function is ON, the unit can memorize the time elapsed from the last time you played
the disc. When playing next time, it will resume playing from the memorized time.
GENERAL SETUP PAGE