Elenberg DVDP-2445, User Manual

Page: 4 / 24

VGA
VGA
Y
U/Pb
V/Pr
Component input
VGA Input
VGA Output
Y V/Pr U/Pb
Component video
output
VIDEO
S-VIDEO
VIDEO
S-VIDEO
SCART Output
SCART Input
Video and
S-Video
Video system connection
S-Video
VGA
Notes:
The following available video output for this unit .
Use the AV cable (yellow terminal) to connect
composite video output of this unit to the
TV/monitor video input
Use the S-video cable to connect the s-video
output of this unit to the TV/monitor S-video input
Use a VGA cable to connect the VGA output to
the TV/monitor VGA input terminal.
Use 3-core AV cable to connect the component
output terminals of this unit to the corresponding
TV/monitor input
Which connection depends on the TV/monitor input terminal.
Don't use the all connections at one time, otherwise the picture will be affected.
Only the physical connection conforms to the video setting can produce the normal
picture (reference to the
Video Setup in System Setup ).
Component Video (YUV)
Connection
Composite Video
Use a 21_pin SCART cable to connect the SCART output to the TV/monitor SCART input
terminal.
SCART
Panel
Rear panel:
Front panel
1 POWER
2 OPEN/CLOSE
3 PLAY
7 NEXT
8 MIC JACK
FL SW Y U/Pb V/Pr VIDEO SL
5.1 CH AUDIO OUT
FR SR CEN
MIX L MIX R COAXIAL S-VIDEO OPTICAL
VGA
1 5.1CH AUDIO OUT
3 VIDEO/S-VIDEO OUTPUT
2 COMPONENT VIDEO
OUTPUT/STEREO/
COAXIAL DIGITAL OUTPUT
4 OPTICAL OUT
5 VGA
6 SCART
ON
OFF
4 PAUSE
5 STOP
6 PREV
2------MIC VOL ------1
SCART
7 MIC VOL 1-2