Elenberg CTV-1540, Instruction Manual

Page: 40 / 47

Basic Operation
40
Audio adjusting
For the audio adjusting of the TV set, the following operating steps are available:
1. Press the menu key of the TV set or remote control, and then press the PROG
/ key to display
a menu as follows on the screen:
2. Press the VOL key of TV set to enter the «sound» menu, and press the PROG / key to select
the item for adjusting.
3. When an item in the menu is selected (the character of the item becomes orange), press the
VOL
/ key to change the number 0100 of this item.
4. Repeat Step 2 and 3 to get a satisfactory sound effect, and the menu will disappear from the
screen about 10 seconds after the operation.
Notes:
the «Balance» in the menu refers to the balance between right and left tracks of the TV set, with a
medium value of 50. When the value of «Balance» changes towards 100, the right speaker of the
TV set sounds obviously while the left one decline; and when the value of «Balance» changes
towards 0, the left speaker of the TV set sounds obviously while the right decline;