Stainless steel materials used in the construction of your LUME are highly rust-
resistant, however, chlorine in the air from swimming pools or the salt from sea air may
cause rust to appear and even create some pitting if left on the product.
Cleaning the Stainless Steel
In extreme environments apply a rust inhibitor which leaves a microscopic protective
layer on the unit.
REQUIREMENTS
1.
These fire features are designed for
outdoor use only
. Not approved for any
indoor use. The fire pit should NEVER be used in a building, garage, or any other
enclosed area. Avoid using near or under overhanging trees and shrubs.
2.
Never leave any other combustible material on the fire feature. This could
cause unsafe operation and damage the component that will not be covered
under our warranty.
3.
To Maintain appropriate airflow, clean out ashes every 2-3 burns or when ash
covers lower holes.
SAFETY WARNINGS
1.
Never leave the Fire Pit unattended during operation.
2.
Clothing or other flammable materials should be placed on or near the
appliance.
3.
Due to the Stainless Steel construction of the fire pit, there is potential for
sharp edges. It is recommended to use gloves for installation.
4.
The fire pit is designed for outdoor use only. Not approved for any indoor use
or enclosed areas.
5.
Improper installation, adjustment, alteration, service, or maintenance may
result in property damage, injury, or death.
6.
The fire pit was designed for wood fuel – using other fuels is not
recommended and may produce more smoke as the design will not function
properly.
7.
After a period of non-use, check the unit for signs of damage or buildup.
8.
The use of a spark screen is required by most states to reduce the number of
embers leaving the fire pit while in use.
6
