Clearance to Combustibles (Not to be used in an enclosed space)
This fire pit is designed for
outdoor use only
. Not approved for any indoor use. The
NES should NEVER be used in a building, garage, or any other enclosed area. Avoid
using near or under overhanging trees and shrubs.
CAUTION:
Due to the Stainless Steel construction of the Lume, there is potential for
sharp edges. It is recommended to use gloves for installation.
Install the fire features on any level, flat, stable, non-combustible surface. NOTE: Do not
place Fire Pit directly on grass, dirt, or rocks as this may prevent proper ventilation.
Paver height 14”.
Fill the bottom of
fire pit 1”
with gravel or sand from the bottom of the fire pit to the
bottom of the stainless steel insert.
Vents are required for any solid concrete fire pit.
SRW (Segmented Retaining Wall) does not require vents and are optional as long as
they are not cemented together, but are recommended for best performance. Ventilation
can be accomplished by cutting an inch off of the width of 3 wall stones and space
symmetrically around the perimeter at the elevation of the bottom of the LUME insert. A
no-cut option is the use of a PAVER-VENT4LNTS or PAVER-VENT6LNTS depending
on the height of the wall stone used.
Stone or sand must be installed to be even with the bottom of stainless steel insert.
SUGGESTED FUEL
Selecting the right wood will depend on preference for comfort, aroma, and visual
image. If you want constant heat output and a short flame with glowing coals,
hardwood such as hickory, oak, or beech are recommended.
If short hot fire for damp weather, select a softer wood such as redwood, fir, or white pine.
4
