Powering on, powering off + rebooting a Walker
Powering On
Press and HOLD the Power button for approximately three seconds (black
button located on the blue face of your Walker... the only button on the entire
Walker), then watch the four status lights next to the power button, as it boots...
Powering Off
Press and HOLD the Power button for approximately three seconds until most
of the status lights turn off. The green Power light will stay on for a short time
while it completes power-down procedures. (If a Reader is paired, it will also
shutdown automatically after the Walker shuts down.)
Restart or shutdown from Console
With your Walker turned on, open the ELEMENTICE Console and click on
"Devices" tab on the top banner of the Console and select the relevant Walker.
You are now on the Device Page and can access the Shutdown or Restart
commands from the row of controls above the image feed.
