V. 07-21
www.plycem.com
V. 10-21
www.plycem.com
2
INSTALLATION GUIDE FOR EUREKA TANK
Multi connector
valve
Inlet valve
Float
Filter
(120 mesh discs)
Air jug
Ask for available stock.
M-inox Filter
*
*
Note:
*Ask for the accessories kit content. Filter may be included or optional
depending on country. The type of filter will depend on inventory
availability.
Build a level, fl at base to place your tank on.
To obtain adequate pressure in the distribution line, verify that from
the base of your tank to the highest expected height (faucet or
shower), there is a minimum height of 2 meters as shown.
According to the installation diagram on page 2, we show below
the plastic accessories (PVC) necessary for its correct operation
(not included).
1 1/2” female adapter.
2 reductions from 3/4” to 1/2”.
2 3/4” male adapters.
3 1/2” male adapters.
2 1/2” elbows.
1 1/2” check valve.
1 tee of 1/2”.
1 ball valve of 1/2”.
1/2” pipe.
Connection accessories
Before installing the tank at the installation site, aspects such
as topography, soil types, fl oodable areas, nearby vegetation,
etc., among others, should be reviewed, nearby vegetation,
etc., and others. This is in order to avoid that any of the before
mentioned factors may interfere with the proper functioning
of the system or jeopardize the structural integrity of the tank.
A bad selection of the installation site may cancel the warranty.
Step 1
MEASUREMENTS
INSTALLATION INSTRUCTIONS
COMPLEMENTARY ACCESSORIES
2500
1610
1540
10
litros
A
mm
B
mm
250
875
570
1-2
450
905
865
2
750
1100
1300
4
1100
1160
1265
5
41
Capacity
liters
A
mm
B
mm
People
-
11
15
19
Weight
Three-layer
(Kg)
Weight
Two-layer(Blue)
(Kg)
29
7
9
11
14.5
