Element4 CLUB 240, Installation Manual

Page: 11 / 36

11
INSTALLATION MANUAL
The Club Series offers the posibilty to change the colour of the
fire bed, next to the standard options already available on the
ProControl app. Via the app, one has a range of solid colours or
varying special colour patterns to choose from.
The amount of users, that can operate the device is unlimited,
so every family member can make use of it, by easily making a
personal account. By two-way communication, one can check
on the device at any moment.
To use the app, the device needs to be provided with the correct
receiver and remote combination and also the receiver should
be connected to net electricity with a 220V adapter, which will
replace the batteries.
Necessities for the installation of the ProControl:
• 220 volt electricty near the fire
• Wi-Fi code of the router
• Smart Phone or tablet
• ProControl manual
Should any problems occur you can always check
APPENDIX B
or check the usermanual or the app itself under the information
menu, marked with a lower case "
i
".
9.2 Domotica
The receiver offers the possibility to be connected to a domotica
system. A special connector is being supplied for this. Type: G60-
ZCE
9 ELECTRICAL CIRCUIT
Figure 9.1
shows a simplified connection circuit for the fireplace.
Every fireplace is provided with a main adapter. The Element4
Club Series comes with the WifiBox as a standard feature, giving
the user full control of the fire via a smart device.
# Omschrijving
(1)
Gas Block
(2)
Receiver
(3)
Main burner
(4)
Pilot set
(5)
Second thermocouple
(6)
6V Adapter
(7) Wifi-Box
(8)
Transformer and powersupply LEDs
(9)
LED strips
9.1 Element4 ProControl App.
The Element4 Club Series offer the possibility to operate your
device via smartphone or tablet with the ProControl App,
available in the appstore on iOS and google play on Android.
The app has a user friendly, interactive layout and the design is
adjusted for Element4 devices. Up to eight devices can be used
with one app, in the situation that multiple fire are installed in
the same location.
Another functionality of the app is to pre-set the temperature
of you device, for a period of one week, to ensure yourself of an
optimal desired room temperature. Also the device can changed
between high and low flames and it features an eco-setting.
(2)
RELAIS
AUX
MODULE
(9)
(1)
(3)
(6)
(8)
(7)
(4) (5)
MERTIK MAXITROL
LED 1 LED 2
RGB 1
+ DO GRN
RGB
power
+ -
RGB 2
+ DO GRN Receiver
RESET
Figure 9.1 - Schematic Electronic Circuit