~ 4 ~
Installation
Transmitter
1. Insert the antenna tube into the antenna wire.
When the transmitter received an audio signal,
the blue SIGNAL LED and the red POWER LED
will illuminate together. If the blue SIGNAL LED
does not illuminate, ensure the audio source is
turned on.
Speaker Receivers
Insert 6 pieces 'C' size ALKALINE battery
into the battery compartment with correct
polarity at the bottom of each speaker
(batteries not included in the package) or
connect the 9V power adaptor to the DC input
jack on the bottom of each speaker, then plug
it to the wall AC outlet.
Connect the supplied AC/DC power adaptor to an
electrical wall outlet.
Plug the AC/DC power adaptor in the DC jack
located on the rear of the transmitter.
When the AC adapter is plugged in, the red
POWER LED illuminates. If the red POWER LED
does not illuminate, make sure the adapter is
plugged in.
The rear of the transmitter has one audio cord that
can be connected to audio output jack of TV,
M o n i t o r , V C R , R a d i o r e c o r d e r ,
C D / M P 3 / V C D / D V D p l a y e r s o r t o
headphone/earphone jack with the connector
provided.
2.
3.
4.
5.
1.
Press On/Off button and turn the speakers
ON. The POWER LED will light up in Blue.
Switch off the speakers by pressing the
ON/OFF button on the speakers or on the
remote control unit, and the LED will be off.
2.
To suit the needs of different users, these
speakers are designed for wall mounting.
There are two holes at the back of each
speaker for you to hang them on the wall.
3.
Remote Control Unit
Remove the battery cover at the rear of
the remote control unit and insert 2
p i e c e s “ A A A ” s i z e b a t t e r i e s ( n o t
included) into the battery compartment
with the correct polarity.
1.
Place back the cover and close the
battery compartment.
2.
Battery Cover
