page 12
FIRMWARE
VERSION 1.00
MATRIX IR ID 4
4.5 REMOTE ID (DEFAULT IR ID: 4)
This function must be set to match the Matrix remote control IR01 with the matrix itself. A
conflict with other devices remote control is avoided.
After entering MATRIX IR ID menu, press ENTER, the LCM LINE 1 number will flash. Then
Press UP or DOWN button to select the number, and then press ENTER to confirm.
When finish MATRIX IR ID setting, MATRIX remote control IR01 must also set the same ID in
order to operation in normal.
Remote IR ID setting mode: Press and hold the POWER button, then press the number button
which can be set from 0 to 9, total 10 groups. (See 5.1)
These settings on IR01 remote control have to be done the first time you use the IR01 or when
you change the batteries.
4.6 VERSION
Display matrix firmware version
Summary of Contents for ELE9096
Page 1: ...4K x 2K HDMI 10x10 Matrix Switch ELE9096 USER MANUAL ...
Page 22: ......