Kelvin™ BRICK User’s Guide
2-2
Chapter 2
Setup
Each yoke has a 13mm (1/2”) hole for mounting to a variety of equipment.
Figure 2.2
BRICK Yoke Mounting Holes
N O T E
When attaching the yoke to the mounting bracket, place the rubber washer
between the yoke and the mounting bracket, as shown below.
Figure 2.3
BRICK
Yoke Assembly
The yoke mounting brackets can be removed from the BRICK allowing the M5 holes to
be used for custom mounting options.
Figure 2.4
BRICK rear view
Yoke
Rubber Washer
Mounting Bracket
Tightening
Knob
Mounting Holes (M5 depth 6.5mm)
