elem MTBE302T, Original Instructions Manual, Page: 19 / 37

19
Warning!
Working position: Always guide
the Electric Hoe by the
handle(s) using both hands
(see Fig.).
V Guide the Electric Hoe at
walking pace only.
Storing Your Electric Hoe
Storage
Risk of fire !
Store your Electric Hoe away
from fuels, oils,
grease and gases.
Maintenance
Warning!
Disconnect the mains plug
before performing all
maintenance work.
Never clean the Electric Hoe with running water,
in particular with water under high pressure.
The gearbox may be very hot during and after
use.
V Wear gloves when performing maintenance
work.
The Electric Hoe is mainly maintenance-free.
Warning!
Risk of injury if you use the
wrong hoe blades.
WARNING: Packaging materials
are not toys! Children must not
play with plastic bags! Danger of
suffocation!
ELECTRICAL SAFETY
Always check that the power
supply corresponds to the
voltage on the rating plate.
Power cable for the device
Please only use power cables that are not
damaged.
The total length of the power cable should not
exceed 50 meters; going beyond this distance will
reduce the power output of the electric motor. The
power cable must have a cross-section of 3 x 1.5
mm2. The insulating sheath of such machines is
frequently damaged. Some of the causes for this
are:
- Cracking due to old age of the insulation
- Kinking caused by improper fastening or
guidance of the power cable
Even though power cables with damaged insulation
sheaths pose a lethal hazard, some people still use
them. Do not make this mistake! Cables, plugs and
socket couplers must meet the following
requirements listed below. Power cables used to
connect machines must have a rubber insulation
sheath.
The power cables must, at the very minimum, be of
type HO5RN-F and 3-stranded. The cable type must
be printed somewhere on the power cable. Only
purchase power cables that are marked! Plugs and
socket couplers for the power cables must be made
from rubber and splash-proof. There is a limit to how
long power cables can be. Longer power cables
require larger conductor cross-sections. Power
cables and connecting lines must be regularly
checked for damage. Ensure that the lines are
deenergized before checking them. Completely
unwind the power cable. Also check power cable
entry points, plugs and socket couplers for kinks.
The machine is intended for private use i.e. for use
in home and gardening environments.
The operating instructions as supplied by the
manufacturer must be kept and referred to in order
to ensure that the machine is properly used and
maintained. The instructions contain valuable
information on operating, maintenance and
servicing conditions.
For safety reasons, the machine may not be used
as a drive unit for other work tools or tool sets of any
kind.
DESCRIPTION
1. Cable
2. Anti-lock button and trigger switch
3. Adjustable auxiliary handle
4. Handle
5. Lower motor housing
6. Nut M6
，
Screw M6 and washer
7. Tine
8. Roller assembly
9.Telescopic tube and adjustment knob
10. Locking nut
11. Socket spanner x2